Description
1/2 HP Thermoplastic Sewage Ejector Pump
- 1/2 HP; max. flow rate is 10000 GPH; 7200 GPH at 10 ft. of discharge lift
- Reinforced, corrosion-resistant thermoplastic submersible sewage pump
- Piggy-back tether float switch for automatic or manual operation
- Combination 2 in. / 3 in. NPT discharge capable of handling up to 2 in. solids
- Designed for easy installation without any plumbing changes
- Easy carry handle for portability
- Cast iron seal plate
- Lower ball bearings for quiet operation
- Designed for 18 in. Dia or larger sewage basins
- Pumps up to 10000 GPH at 0 ft.
- Reinforced, corrosion-resistant thermoplastic construction
- Durable and ready for basement installations
The Wayne SEL50 is a 1/2 HP, durable reinforced thermoplastic sewage pump that performs up to 10000 GPH at 0 ft. It is designed to fit in 18 in. or larger sewage basins. Is ideal for basement or below-grade installations.
- Actual Solids Capacity: 2 in.
- Amperage (amps): 10.5
- Cord Length (ft.): 10
- Discharge Flow @ 0 ft. (gallons/hour): 10000
- Discharge Flow @ 0 ft. (gallons/min): 167
- Discharge Flow @ 10 ft. (gallons/hour): 7200
- Discharge Flow @ 10 ft. (gallons/min): 120
- Features: Bottom/End Suction,Solids Handling,Submersible
- Housing Material: Thermoplastic
- Impeller Material: Thermoplastic
- Maximum Horsepower (hp): 1/2
- Maximum Pressure (psi): 9.5989
- Maximum Working Temperature (F): 133
- Minimum Sump Basin Diameter: 18 or More
- Minimum working temperature (F): 33
- Outlet Connection: Threaded male
- Pack Size: 1
- Power Type Required: AC
- Product Weight (lb.): 26
- Pump Switch Type: Tethered
- Returnable: 90-Day
- Septic Pump Type: Ejector
- Vertical Lift (ft.): 10
- Voltage: 120v
- Certifications and Listings: No Certifications or Listings,UL Listed
- Manufacturer Warranty: 1 Year Limited Warranty
- Product Depth (in.): 8.5
- Product Height (in.): 12
- Product Width (in.): 8.5
